SE Series Edgings
The IBC building code requires that all low slope roofing systems ( built up asphalt, single ply, modified,etc.) use perimeter metal details that have tested according to the ANSI / SPRI ES-1 testing procedure. This applies to copings, gravel stops, and metal edgings. Most states have adopted the provisions of the IBC building code.ULTRA SEAM has developed a line of coping, gravel stops, and edging that have been tested in both aluminum and steel options. We have standard and snap lok versions of each type of trim.
THE STANDARD EDGING ( SE SERIES EDGING ) IS A TRADITIONAL STYLE EDGING THAT IS EASY TO INSTALL. IT REQUIRES THE MEMBRANE TO BE SEALED TO THE EDGING FLANGE AFTER THE INSTALLATION OF THE EDGING. THIS IS WELL SUITED FOR ASPHALT OR MODIFIED ROOFS OR OTHER MEMBRANES WHEN UNOBSTRUCTED WATER DRAINAGE IS NEEDED.
SE SERIES EDGINGS ARE AVAILABLE IN VARIOUS METALS. THEY ARE ES-1 TESTED IN 24 GA. STEEL AND .040 ALUMINUM. MAXIMUM TESTED FACE SIZE IS 8” . CALL ULTRA SEAM FOR DETAILS. 800-USI-SEAM(874-7326)